Mostly about food, this blog is just a place for me to throw things that are of interest to me. I appreciate you taking the time to stop by an look around. This represents just some of the stops on the various pathways that this amateur home cook finds himself.

You may find that these foods tend toward protein and away from carbohydrates - this is due to diabetic issues, so I try to only sparingly use carbs, and good ones at that. Of course, sometimes I forget....

Feel free to drop me a line with any suggestions or just to let me know what you think. Thanks!

If you c


Search This Blog

A Little Navigation...

Yá át ééh!

I want to thank you for the time that you spend here, and hope that you can find useful things here.

Hagoonee'


Thursday, August 11, 2011

Shredded Beef

Easy, inexpensive, juicy and full of flavor!

There are many cuts of beef used for making shredded meat, from top round to chuck roast. Hardly anyone uses brisket, because of its reputation for being so tough. Well, like so many other things, it’s more how you cook it. Brisket is not only full of beefy flavor, it is usually about the cheapest large cut of meat available. Let’s work some magic on it.

First you have to prepare the brisket for cooking. You can’t just take it out of the package and throw it in a pot. Remove the unwanted fat and other stuff, as described here. Then you’ll want to season the meat on all sides fairly well with fresh ground black pepper. We aren’t using any salt at this point for a couple of reasons. We are going to be reducing the cooking liquid, which would tend to make it saltier and saltier. Also, salt will draw moisture out of meat, that’s even an ancient technique for preserving it, so we don’t want to dry it out. Finally, we can always add it later, but you can’t take it out if you overdo it.

Next, you want to identify the grain direction in the meat. In the picture above, you can see that it runs from the upper left to lower right. You will then want to cut the meat in strips directly across the grain, each strip being a little wider than you want the final shredded meat to be. It is a lot easier to cut to length now than after it is cooked when it is so loose. Below you see pictures of both a brisket flat (top) and point (bottom) which have been peppered and sliced against the grain.

Now you can get out your 10” or larger Dutch oven, and add 16 oz. (one can) of beef broth, using reduced or no sodium if available and the same amount of water. Turn the heat to medium or medium-low. After that, into the pot goes the meat. It is okay if it’s not completely submerged, you’ll be moving it around later.

Cover the pot and let it cook at a low boil / simmer, rearranging the meat and adding liquid as needed about once an hour. After 3 to four hours, you will find that the meat has become quite tender, similar to a good pot roast. After 5 or 6 hours, you’ll find that the meat is falling-apart tender. Time to carefully fish it out.

Using two forks take out the pieces of meat one at a time and shred them. Continue this until the meat is all shredded. You will end up with a large pile of goodness like this:

As you shred each chunk of meat, put the finished shreds back into the cooking liquid to keep it moist, because once shredded it can dry out fairly quickly. One of the advantages of de-fatting the meat prior to cooking is that you don't end up with all that grease in the broth that remains. You will eventually end up with a nice big pot of shredded goodness. Use it from here, or you can prep to refrigerate or freeze it in portions, liquid included. Whatever you do, just be sure to keep it very moist, or you’ll end up with shredded jerky.

Brisket Prep 101

This is a tough topic to discuss. For some it will be far more than they want to know, and for some it will be old hat and nothing new. That doesn't make it any less valuable or worth going over one more time. Today’s topic is brisket – popular in many ethnic schools of cooking worldwide, and the pride of Texas BBQ masters. Brisket is known as the most difficult meat for BBQ smoking this side of a whole hog, and frustrates many a home and competition cook. Picking a brisket involves a lot of variables, including weight, shape and grades. All these things may have an affect on your final result, regardless of how you choose to cook it. Brisket is usually available three way: as a whole or "packer" brisket, found sealed in a heavy cryovac bag; as a brisket flat, or less often as just the deckle or point. I always buy packer briskets, as they are usually significantly less expensive per pound and I can prep them how I like. They also have a longer refrigeration/freezer life and less of a chance of contaminants as they are handled fewer times. The packaged flat and points are generally made up at the market, which means they are packaged and handled locally and not as sanitary as the factory anaerobically-bagged ones. Here is a 10 lb. typical ‘packer’ brisket:

On top of all that, I’ve seen briskets from as small as 7 lbs. to as large as 16 lbs. This raw weight can’t be directly used as a measure of how many portions you will end up with, because there is significant loss when cooking a packer brisket. Between all of the excess fat and some shrinkage in cooking, you can only expect to end up with between 50%-60% of the raw weight when you are done.

Brisket, like other cuts of beef, is also available in three grades: Select, Choice and Prime. This is determined primarily by the amount of marbling, or intramuscular fat, which is present in the beef, but also to some extent by the age of the animal. This type of fat equals flavor, tenderness and juiciness, so Prime beef is the most-marbled – and most expensive grade of beef. In most cuts, it is also the most difficult to find as a great deal of it goes straight to restaurants, and only 2% of beef is graded Prime. Choice is the next highest grade, and is perfectly acceptable for cooking. Select is third-highest grade, and usually the lowest grade found in stores. Meat that is not shown as graded is usually Select, but may be even lower. In my experience, It is worth buying Choice over Select, but except for a few great steaks, the price premium you’ll pay for Prime over Choice is rarely worth it. Try and buy Choice briskets if you can. Notice the imprint (below) on the cryo bag – the ink color is different depending on the grade of the meat. If present, this will either say USDA Select (black ink), USDA Choice (blue ink), or USDA Prime (red ink). If you can’t find the grading stamp on a cryovac bag, go elsewhere. Remember, this system is for beef. There is no comparable grading system for pork, you just have to use your eyes and your experience.

So, let’s get it out of the bag and look at what we have. The first thing you'll notice is that the brisket cut is roughly a long triangle. The brisket is actually parts of two different muscles, held together by connective tissue, and it comes from the breast area of the cow - one on either side between the front legs. Think chest muscle. The wider but thinner part is referred to as the 'flat', and the thicker, more pointed end is known as the point or deckle end. It is important to understand the difference between these two muscles, as you will see shortly. There is also a considerable amount of fat on the surface and within the brisket. One side of the meat (the top) seems to be entirely covered by fat, and the other side (the bottom) usually has some spots and one giant hard knot of fat. If you examine this fat more closely, you’ll see that there are three different ‘types’ of fat on the brisket. The two large muscles are held together by connective tissue and considerable fat. If you have ever had a large slice of brisket, chances are you’ve noticed a strip of fat running down the middle lengthwise – this is that layer.

The first type is a white very hard fat. The second type is like regular deposits or layers of a softer fat, and the third is a thin, membranous fat. You can see examples of these pointed out in the pictures below. The red circles outline some of the hard fat, and the blue circles some of the regular type fat. Once you identify the different types on your meat, you’ll be able to recognize it anywhere it occurs on the brisket.

Top (point side up)

Bottom (point side down)

Trimming a brisket for cooking really depends on the demands regarding how it will be prepared. When it comes to me, however, I always trim it very closely, discarding almost all external fat. This is a source of some amusement to some of my BBQ friends, as it flies in the face of the conventional wisdom. The mantra of cooking brisket low & slow is to cook untrimmed and fat side up, so that the melting fat cap “bastes” the meat below. Apologies to all, but that's hooey.

In my experience, the only way in which the exterior fat enhances the moisture in a brisket is that it hinders moisture from escaping, like a waterproof ‘blanket’. Unfortunately, if you are putting it on a smoker, the fat will also prevent the smoke making it’s way into the meat, and will keep any mop or rub you use from actually penetrating and seasoning the meat. As a result, I trim my briskets rather drastically, regardless of how I’ll be preparing it. As long as you pay attention to your cooking methods, you shouldn’t have an issue with drying your brisket out.

First I check to see if there is any patch of old brown surface (shoe leather) on the brisket. This is an artifact from the processing / aging process and is definitely not good eats. This usually occurs along the side, and you’ll want to remove this from your brisket wherever you find it.











Next, I remove all of the hard fat and large globs of regular fat from both surfaces of the brisket. These two pictures below correspond to the two smaller pictures above – same meat in the same position, just with the fat removed. In the pictures below, there are some patches circled in blue. Here you see some thin, light fat areas – this type of stuff is fine to leave behind.

Top (point side up)

Bottom (point side down)

Top (point side up) after trimming off the fat:

Bottom (point side down) after trimming off the fat:



Next, I remove all the hard fat I can from the area between the flat and point. Usually, I actually separate the two pieces completely for cooking, even if I am putting them on the smoker. The point end has much more marbling in it than the flat, and they tend to cook at different rates. Furthermore, the grain in the point runs at an angle of about 45° from the grain in the flat. This is important because brisket is something that you always slice across the grain to serve, just because of all the fibers. If the grain is running in two different directions, that is rather hard to do. Here you can see that I have hem separated, and all the large fat in between removed.

I know this is a lot of trouble, but if you pay attention you will have delicious meat without all the extra fat involved. If you are planning on removing the fat after you cook, I suppose you can, but it will be soft and much more difficult, in addition to all the other negative aspects of cooking with it intact.


Saturday, August 6, 2011

Native Supper

A simple dinner tonight, taking our foods from the First Peoples in the western hemisphere. From the Táino peoples of the Greater Antilles in the Caribbean, we have the origins of the sweet potato. Also, from the plains we have the Great American Bison.

And finally from the Four Corners area, we have Anasazi beans and the three sisters of beans, squash and corn. Before the Navajo, there were the Anasazi, who somewhere around the 8th century began to rely more and more on cultivated crops. These included squash, maize (corn) and beans. Although their civilization mysteriously vanished in the 12th and 13th centuries, their food heritage has not.

I baked the sweet potato just like you would a regular potato - you can use either the oven or a microwave, just don't over cook. I also put together a Three Sisters Succotash, and grilled up some bison filets on the super-hot rocket grill. We had a simple, easy to prepare and nutritious Native American supper, with about as few artificial ingredients as there can be in a meal.

Yá'át'ééh, shik'is.

The Three Sisters

Naa'ołi, Naadáá' dóó Naayízí

Succotash is probably *the* original American food. Corn, beans and squash have been and remain the principal foods of many Native American tribes. They are called the sisters because they are often used in companion planting, helping each other to thrive. The corn grows tall strong stalks, but has relatively shallow roots. The beans can use the corn for climbing support, and their roots fix nitrogen in the soil for the corn to use. And finally, the squash provides good ground cover, it's large leaves shading the corn's roots and retaining moisture.

Try this as a vegetable dish whose roots go back a long time. The idea is to make it quick and not to overcook the vegetables.

Ingredients
1 unpeeled zucchini/summer squash, medium dice
2 fresh ears (stripped) or 10 oz frozen corn
1 cup cooked beans (Anasazi, Tepary or any variety of heirloom beans), liquid reserved
2 Tablespoons diced red pepper for color
1/8 teaspoon ground sage
fresh ground black pepper to taste
salt to taste


MethodHeat a large, nonstick skillet (or cast iron) over medium high heat.
If using fresh corn, strip the kernels off of the corn cobs - be prepared to chase a few.


Lightly spray the hot pan with an aerosol oil, like Pam. Toss the stripped (or frozen) in the heated pan, stirring constantly so as not to burn them.


Once you smell the roasted corn and see the kernels starting to brown a bit, add in the drained beans and stir to mix well and heat up. Here is an example of dried heirloom beans.


Once the beans are warmed, add in the diced squash, peppers and the sage. Add in enough of the reserved been cooking liquid to adjust the consistency, then taste and season to as desired with salt and pepper. Stir until all is hot and serve immediately. You still want the squash to be a bit firm, not soggy.


Optional: Add some mutton and make it a stew!